#Motorola flashcode how to#
#Motorola flashcode manual#

Your CTCSS code will probably be set to zero. You will be entering the CTCSS code programming mode. In order to move on and enter the next programming section, you will need to press the PTT button again.If you do not want to change this, just leave it as channel one. Change it up if you want to make it to some other channel number. To program frequency, you will need to press the buttons One or Two in order to move through the frequency that is made for that channel.A voice coming from the radio will say that you are about to program the frequency of that channel. In order to do so, you will have to press the PTT button. And now, you will need to start the actual programming.By default, you will be on channel one, which means that you are going to be programming channel one, you can change the channel if you want to program some other channel. And, in this mode, you will have the ability to select which channel you are going to program. Now you have entered the programming mode. You will have to wait until that little red LED light has turned green, and until you hear a navigating voice coming from the radio’s speakers. While you hold these two buttons, turn on your Motorola radio.The next thing that you will need to do is to hold the PTT button, as well as the side button one at the same time.And, in order to do so, your Motorola radio must be turned off, so, if it’s on, turn it off right away. You will first need to enter the programming mode.We will begin with the steps in just a moment, but, first, take a look at your Motorola radio, and remember its LED light, it is now flashing a red light, right? Well, that’s a good thing.

#Motorola flashcode manual#

We know that the manual of Motorola radios might be a bit too complicated and not easily understandable, but, you will see yourself that this process is not hard at all and that it will be done in just a few minutes.

#Motorola flashcode how to#

So, today, you will be learning how to successfully program your two-way Motorola radio without the CPS. Photo: Steps to successfully programming a Motorola radio So, let’s start this How to program a Motorola radio guide.

Have in mind that this guide can be used on all of the Motorola radio models and that it is guaranteed to work. And, in this article, we will be showing you a way to program your own two-way Motorola radio in just a couple of minutes. The simpler the design of the radio, the harder it is to program it properly. Learning how to program one Motorola radio can be easy, yet an essential thing to do. Some of them are pretty simple, and some have advanced features. Motorola company has many different models of radio available for purchase. The process is applicable to all of the Motorola radio models…